vinyl Flooring salt lake city
How to Install Vinyl Flooring Salt Lake City
If you've chosen luxury vinyl plank flooring for your household or business, you've undoubtedly considered the numerous advantages of this type of flooring. Vinyl flooring Salt Lake City tiles and planks are well-known for their remarkable water resistance, scratch resistance, and overall durability, making them excellent choices for high-traffic areas, particularly those that may become moist. Additionally, vinyl is quite appealing, mimicking the look of real wood at a fraction of the cost. However, one of the primary reasons we enjoy vinyl is that it is entirely do-it-yourself friendly and can be laid even by folks who are completely new to flooring.
Laying Vinyl Plank Flooring
Vinyl planks are considered to be one of the most popular vinyl flooring alternatives available today. Installing these planks is simple due to their "click and lock" feature. Before you start, make sure to read the manufacturer's installation instructions, as each model has different needs. However, below is a general summary of installing vinyl plank flooring. Remember that nothing beats professional installation, so call the vinyl plank floors Salt Lake City pros for the best results.
Prepare the Surface and the Planks
When it comes to installing vinyl flooring Salt Lake City vinyl floors, preparation is with no doubt the most important phase. Vinyl, laminate, tiles, and linoleum can be laid over existing flooring; however, the surface beneath the vinyl flooring must be completely clean, even, and dry.
- Please allow your new vinyl flooring to become acclimated to the environment in which it will be permanently installed for approximately 24 hours or for the amount of time advised by the manufacturer in their installation instructions.
- Starting with your belt sander and coarse belt — use 40- or 60-grit —, sand down any bumps, ridges, or bulges in the subfloor until they are completely smoothed down. Remember not to sand any old tile flooring since they may have asbestos in them. For this type of work, you should consult with a professional retail installer.
- Vacuum your existing floor or subfloor thoroughly, collecting all dirt, dust, and debris from sanding and sweeping it up. Remove all moldings and baseboards from the room.
Install the Floors
Mark the center of the walls with your chalk line and use the snap lines to ensure a straight line will be produced against the wall.
- Use a utility knife to score the tongue of the board and then set it on the starting line, tongue towards the starting wall. Insert spacers between the plank's short and long sides. Take your following plank and secure it in place. Repeat this procedure.
- The final planks in the first row will require cutting. To do so, remove a quarter of an inch from a distance between the final plank and the wall. This step will be detailed in your flooring installation manual.
- Row by row, work from left to right, leaving enough room around the walls and any vertical objects or columns. After each click, use a soft-faced hammer to secure the plank in place firmly.
Finish the Floors
As soon as you've finished laying the majority of the flooring, it's time to begin the process of completing it so that you may reassemble your area.
- Finalize the job with a thorough cleaning, and only reassemble furniture after you've placed protecting felt to the legs of each piece of furniture.
- Remove all spacers from the room's perimeter.
- Reinstall your baseboards or molding.
- Vacuum thoroughly and, if necessary, clean your floor according to the recommended procedure. Avoid damp mopping your flooring for a few days if you utilized any form of adhesive during the process. Additionally, the guidelines may specify a waiting interval before walking on the floor.
- Take note of your warranty responsibilities. Each manufacturer establishes specific guidelines for warranty coverage.
Whether installing hardwood, vinyl plank, or other forms of flooring, installation is becoming increasingly do-it-yourself friendly. That is not to say that amateurs should perform the majority of installations. If you have any worries or are working with a complicated room configuration, it's advisable to consult vinyl flooring Salt Lake City flooring professionals.